New Sensors in Geppetto

July 12, 2019 | Sergey Olkhovsky

We have added four sensors in Geppetto for you to use in your designs and projects.

Sensors

We have a wide-array of sensors available in Geppetto and are continuously adding more everyday. If you can’t find a sensor you need, please feel free to send us an email at support@gumstix.com.

Gyroscope

A gyroscope is a device used for measuring or maintaining orientation and angular velocity.

L3GD20H from ST

This gyroscope is a low-power three-axis angular rate sensor. It can be used on motion sensing, drones, game consoles, and game controllers.1

Magnetometer

A magnetometer is a device used for measuring magnetism.

BMM150 from Bosch

BMM150 is a low power and low noise 3-axis digital geomagnetic sensor. It’s commonly used on drones, augmented reality applications and location-based services, indoor and outdoor navigation, gaming, and pointing devices.2

IMU

An inertial measurement unit (IMU) is a device that measures and reports force, angular rate, and sometimes orientation of the body using a combination of accelerometers, gyroscope, and sometimes magnetometers.

BMI055 from Bosch

The BMI055 is an ultra-small, 6-axis inertial sensor, consisting of: A digital, triaxial 12bit acceleration sensor and a digital, triaxial 16bit, ±2000°/s gyroscope.3

Its applications include activity monitoring, step-counting, navigation, vibration measurement (also for active damping), six-dimensional tracking of trajectories, flat detection, tap sensing, menu scrolling, tilt compensation for electronic compass, shock and free-fall detection, and image stabilization.

Barometer

A barometic is an instrument to measure air pressure.

BMP280

BMP280 is an absolute barometric pressure sensor especially designed for mobile applications. The sensor module is housed in an extremely compact package. Its small dimensions and its low power consumption allow for the implementation in battery powered devices such as mobile phones, GPS modules or watches.4

It can be used for enhancement of GPS navigation (e.g. time-tofirst-fix improvement, dead-reckoning, slope detection), indoor navigation (like floor detection or elevator detection), outdoor navigation, leisure and sports applications, weather forecast, health care applications such as spirometry, and vertical velocity indication (e.g. rise/sink speed).


Sources

Information on this page is taken directly from their respective product pages.
1 L3GD20H (https://www.st.com/en/mems-and-sensors/l3gd20h.html)
2 BMM150 (https://www.bosch-sensortec.com/bst/products/all_products/bmm150)
3 BMI055 (https://www.bosch-sensortec.com/bst/products/all_products/bmi055
4 BMP280 (https://www.bosch-sensortec.com/bst/products/all_products/bmp280)

Geppetto is our free online design tool that allows you to create a custom hardware design. Moreover, we handle everything, from sourcing of parts to production, to ensuring that your board boots out of the box. We take care of production while you focus on your software or application. We will deliver your pre-tested, fully assembled boards (not just PCB) after 15 business days.