Pinto-TH is a DIP-style breakout board for any Overo COM featuring USB OTG, 3.3V supply, and level shifters for use with a set of test pads.
IMPORTANT: This version of the Pinto-TH Board is deprecated because it mates only with Overo COMs using the discontinued AVX connectors, manufactured before January 2020.
Overo COMs manufactured since January 2020 use Panasonic connectors. If interested in a version of the Pinto-TH with a Panasonic connector, contact us.
DIP style breakout board for any Overo COM featuring USB OTG, 3.3V supply and level shifters for use with a set of test pads. This board is for engineers and makers looking to prototype and experiment with the Overo COM.
You may also want to include Janus to have USB console port access to the Overo COM.
Please note: The maximum input voltage on a standard Pinto-TH is 5.5V due to capacitor ratings. This can be changed by modifying the capacitors. View the schmatics for more information.
2 x 70-pin AVX connectors
Input: 5.5V recommended (Max: 10V)
Built with components rated -20< T <70C
|Texas Instruments TPS62111 Step-Down Converter||
A low-noise synchronous step-down DC-DC converter. Component Max Vin: 17V, 1.5A.
|70-Pin AVX Connectors (Female – Overo Expansion)||
Connect an Overo COM to an expansion board with these 70-pin AVX connectors.
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.