Gumstix Jetson Nano/Xavier NX Development Board
Powered by the NVIDIA Jetson Nano or the Xavier NX, the Gumstix Jetson Nano Development Board is a perfect starting point for your edge AI project.
Yocto image with built in TensorFlow support for Jetson Nano included. Xavier NX software is supported by the NVIDIA Jetpack 4.4DP.
IMPORTANT: To ensure compatibility make sure to use a Jetson Nano (V. B01 or newer) or the Jetson Xavier NX (V. A02 or newer).

Gumstix Jetson Nano/Xavier NX Development Board 




The Gumstix Jetson Nano/Xavier NX development board is the perfect upgrade, further drawing out the capabilities of either connected module. The board provides most standard and commonly used interfaces and connectors, making it an all around solid choice for developers looking to add extra functionality to their AI project. It offers great versatility with the ability to be hooked to further sensor technologies, and can be used in a wide-range of applications.
The Gumstix Jetson Nano Development Board, can be powered by the NVIDIA Jetson Nano or the Xavier NX to bring out most of these frequently used interfaces.
- HDMI
- USB 3.0
- 2 x Raspberry Pi Vertical Camera Connector
- M.2 (Key E) Wireless card interface
- Ethernet Connector
- USB Micro-B Jack for flashing
- USB Micro-B Jack for console debugging
- Raspberry Pi Compatible 40-pin header
Jetson Nano Heatsink now available at Gumstix online. Jetson Xavier NX Heatsink coming soon.
Important
To ensure compatibility make sure to use a Jetson Nano (V. B01 or newer) or the Jetson Xavier NX (V. A02 or newer).
Included Components | ||
Gumstix Jetson Nano Development Board | Uses NVIDIA Jetson Nano COM Connector as its COM/processor. Functional modules include: USB Micro-B Jack 4-Port USB 3.0 Hub HDMI Dual Stacked USB 3.0 Type A Dual Stacked USB 3.0 Type A Ethernet Connector USB-UART USB Micro-B Jack Raspberry Pi Vertical Camera Connector Powered by a Barrel Connector (20V 3A). |
---|
Family | Gumstix, Nvidia |
---|---|
Camera Connector | Vertical cable orientation connector for Raspberry Pi Camera. |
Ethernet | 10/100/1000 Base-T |
HDMI | HDMI Type-A connector |
Processor | Quad-core ARM® A57 |
RAM | 4 GB 64-bit LPDDR4 |
USB Device | Micro B USB Plug |
GPU | 128-core NVIDIA Maxwell™ architecture-based GPU |
M.2 Compatible | M.2 Key-E |
USB 3.0 SuperSpeed | Conforms to the USB 3.0 (or higher) standard. |
Barrel Connector | Industry standard barrel connector |
Key Components | ||
RJ45 Jack with Gigabit Magnetics | RJ45 Jack with Gigabit Magnetics |
Specs |
---|---|---|
Micro B USB Plug | Micro B USB Plug |
|
2.0 mm 20V DC Power Jack | 2.0 mm 20V DC Power Jack |
|
USB 3.0, Type A Receptacle, Stacked, Right Angle Thru-hole | USB 3.0, Type A Receptacle, Stacked, Right Angle |
|
FTDI FT232RQ USB UART Interface | Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface |
Specs |
Socket Connector DDR4 SO-DIMM Right Angle - Jetson Nano | Socket Connector DDR4 SO-DIMM Right Angle 260 Position Surface Mount Solder T/R - Used on Jetson Nano |
Specs |
Mating Connectors |
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.
Software Version: