Overo® IronSTORM-BY COM
Extended temperature DM3730-based Gumstix computer-on-module includes OpenGL and DSP with Texas Instruments' WiLink 8 Bluetooth 4.1 + BLE and 802.11b/g/n wireless communications with Access Point mode.
The Overo IronSTORM-BY has been discontinued. We no longer have units available for purchase. If you have any questions, please contact sales@gumstix.com
Overo® IronSTORM-BY COM 
Get the best of wireless communications, graphics processing and extended-temperature components with the Overo® IronSTORM-BY computer-on-module. With a DaVinci Digital Video Processor for graphics and featuring access point mode, 802.11b/g/n WiFi and Bluetooth 4.1 with BLE using TI's WiLink 8 wireless module, the Overo® IronSTORM-BY COM has all the features you need for your wireless graphics project.
All Overo COMs are now 256MB RAM and 512MB NAND. All of them are using the new Panasonic 70-pin connector
More details about the New Connectors is available here.
| Included Components | ||
| Spacers (1.5mm 0-80 retaining 48/48) | spacers: symmetric 48mil PCB with 1.5mm between |
|
|---|---|---|
| Overo IronSTORM-Y COM (board) with CON084B | Overo IronSTORM-Y COM (board) with CON084B |
|
| Family | Gumstix |
|---|---|
| Access Point Mode | Yes |
| Bluetooth | 4.1+BLE |
| Board-To-Board Connector | AXK870145WG |
| Camera Connector | 27-Pin (OMAP ISP) |
| Flash Memory (NAND) | 512 |
| Graphics Acceleration | OpenGL POWER SGX™ Graphics Accelerator |
| Digital Signal Processor | High Performance Image, Video, Audio (IVA2.2™) Accelerator Subsystem |
| Width | 17 mm |
| Length | 58 mm |
| Performance | Up to 2,000 Dhrystone MIPS |
| Power Management | Texas Instruments TPS65950 |
| Processor | Texas Instruments DaVinci DM3730 Applications Processor |
| Processor Architecture | ARM Cortex-A8 |
| Processor Base Clock | 1 GHz (Recommended @ 800 MHz) |
| Storage Expansion | via microSD Card Slot |
| WiFi | 802.11b/g/n |
| Manufacturer | Texas Instruments |
| Key Components | ||
| U.FL Antenna with Collar | U.FL antenna with collar for Bluetooth and/or 802.11b/g/n wireless communications. |
|
|---|---|---|
| microSD Card Slot | An onboard card-slot for system storage expansion using microSD cards. |
Specs |
| Texas Instruments TPS65950 Power Management | The TPS65950 device is a highly integrated power-management integrated circuit (IC) that supports the power and peripheral requirements of the OMAP3-driven Overo series COMs. |
Specs |
| TI WiLink8 WL1831 | The certified WiLink 8 module from TI offers high throughput and extended range along with Wi-Fi and Bluetooth coexistence in a power-optimized design. |
Specs |
| Texas Instruments DM3730 Applications Processor | 1GHz ARM Cortex-A8 DaVinci DM3730 high-performance, extended temperature microprocessor. Includes a 720p HD DSP imaging and video accelerator and PowerVR SGX graphics accelerator with Open GL ES 2.0 and OpenVG support. The DM3730 has been designed to provide best in class ARM and graphics performance while delivering low power consumption. |
|
| Mating Connectors | ||
| U.FL Connector | Attach a U.FL Wi-Fi or Bluetooth antenna (not included) to a Gumstix system with this connector. |
|
| Hirose 27-Pin Camera Connector (Overo COMs) | Connect a Caspa camera to an Overo COM with this connector (Hirose FH26-27S-0.3SHW) |
Specs |
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.
Software Version:
