Gumstix Colibri iMX6 Dev Board
Gumstix Colibri iMX6 Dev Board is a development board ideal for engineers and makers who want to prototype and explore the possibilities with the Toradex Colibri iMX6 COM. This is a full-featured development platform with multimedia, USB and network I/O, and bootable MicroSD card slot.
Once you have tested the board, you may use Geppetto online to design and customize it for your own project.
Gumstix Colibri iMX6 Dev Board
Gumstix Colibri (iMX6) Development Board
This SBC-like expansion board breaks out many features of the Colibri i.MX6 so you can test and develop your project with ease.
The Colibri iMX6 targets a wide range of applications, including: Digital Signage, Medical Devices, Navigation, Industrial Automation, HMIs, Avionics, Entertainment system, POS, Data Acquisition, Thin Clients, Robotics, Gaming and much more.
Toradex Colibri i.MX6 COM is not included. You may purchase the COM directly from Toradex.
Customize Your Board
You can modify the design, layout and features of the Gumstix Colibri i.MX6 Dev Board to fit your project's requirements with ease in an intuitive drag-and-drop interface
Customize Your Kernel
To get started customizing the Yocto image for this board or any Geppetto-created expansion board based on the Toradex Colibri i.MX6 platform, Please review the Toradex webinar on building images for embedded linux.
Updated sources matching those created in the webinar are available here.
Find more information about this product by reading one or all of the following:
|Toradex Colibri Development Board||
Toradex Colibri (iMX6) development board which includes HDMI, 4.3" resistive touch screen, ethernet, USB Host, USB OTG, audio in/out, bootable uSD card, real-time clock and GPIO inputs and outputs.
|Access Point Mode||
Compatible with Newhaven Displays
|RTC Battery Holder||
Holder for 6mm rechargeable coin cell RTC battery
via microSD Card Slot
Micro B USB Plug
|U.FL Antenna with Collar||
U.FL antenna with collar for Bluetooth and/or 802.11b/g/n wireless communications.
|microSD Card Slot||
An onboard card-slot for system storage expansion using microSD cards.
|Connector (Power Jack Medium)||
PJ-018H-SMT, medium size (1.65mm), fits EIAJ-2 plug
|USB Standard A Jack||
The USB Standard A jack allows a Gumstix system to operate in USB Host mode
|Connector (Battery 6mm)||
Rechargeable coin battery holder
|IC (RTC 1.8V)||
IC (RTC 1.8V)
|FTDI FT232RQ USB UART Interface||
Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface
|TI WiLink8 WL1831||
The certified WiLink 8 module from TI offers high throughput and extended range along with Wi-Fi and Bluetooth coexistence in a power-optimized design.
|Crystal (32.768kHz TINY)||
Attach a U.FL Wi-Fi or Bluetooth antenna (not included) to a Gumstix system with this connector.
|Hirose 40Pos FPC/FFC Connector||
CONN FPC/FFC 40POS .5MM HORZ SMD, Bottom Contacts
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.