Gumstix Pi Compute Dev Board
Gumstix Pi Compute Dev Board is a complete multimedia expansion board for the Raspberry Pi Compute Module featuring DSI display and CSI2 camera connectors. This board is ideal if you are looking to prototype portable devices and IoT boards with camera and HDMI capabilities.
Gumstix Pi Compute Dev Board 
Jumpstart your Pi Compute design with the GUMSTIX PI COMPUTE DEV BOARD. Clone it from the Upverter ”Designed by Gumstix Community” to build your custom design or order the Gumstix Pi Dev board to start your development.
Use the Gumstix Pi Compute FastFlash to upload the latest disk image to your Raspberry Pi Compute Module (not included) . Raspberry Pi Compute Module is not included. Available from element14.
Customize the Gumstix Pi Compute Dev Board to your project’s specific needs in Upverter D2O. Add functionality or remove unused components with the ease of a drag-and-drop interface.
- Clone and kickstart your customized Raspberry Pi Compute Module expansion board design
- Explore and create a customized expansion board from scratch
- Learn more about Upverter
Other connector
1 × Molex HDMI SMT Connector
What’s included 1 × Raspberry Pi Compute Module Development Board
Key component 1 × SODIMM Connector 2 × FCI 15 pin FPC connector 1 × Connector (Power Jack Medium) 1 × FTDI FT232RQ USB UART Interface 1 × USB Standard A Jack
| Included Components | ||
| Raspberry Pi Compute Module Development Board | Raspberry Pi Compute Module Development Board |
|
|---|---|---|
| Family | Gumstix, Raspberry Pi |
|---|---|
| Camera Connector | CSI2 connector to connect the board to a Raspberry Pi Camera using an appropriate ribbon cable |
| HDMI | HDMI type A port |
| LCD | DSI connector to connect the board to a Raspberry Pi Display using an appropriate ribbon cable |
| PWM(s) | Dual PWM header |
| USB Device | Micro B USB Plug |
| USB Host | USB 2.0 type A Jack |
| GPIO(s) | 20-pin Header with 16 GPIOs. |
| Barrel Connector | Industry standard barrel connector |
| Key Components | ||
| SODIMM Connector | SODIMM connector to DDR2 200 pin module, such as the Raspberry Pi Compute Module |
|
|---|---|---|
| FCI 15 pin FPC connector | Raspberry pi CSI2 and DSI connector |
|
| Connector (Power Jack Medium) | PJ-018H-SMT, medium size (1.65mm), fits EIAJ-2 plug |
|
| FTDI FT232RQ USB UART Interface | Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface |
Specs |
| USB Standard A Jack | The USB Standard A jack allows a Gumstix system to operate in USB Host mode |
Specs |
| Micro B USB Plug | Micro B USB Plug |
|
| Mating Connectors | ||
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.
Software Version: