Gumstix Raspberry Pi CM4 Uprev
Got a custom CM3 board and wishing it had a Raspberry Pi 4? Forget re-designing it! Grab a Raspberry Pi CM4 module, drop the Gumstix Raspberry Pi CM4 Uprev in the middle and take advantage of the CM4's improved power and speed!
Gumstix Raspberry Pi CM4 Uprev 
The Gumstix Raspberry Pi CM4 Uprev board allows the Raspberry Pi CM4 COM to be used on most existing CM3 boards. Note, this board is not compatible with CM3Lite or CM4Lite. The CM4's GPIOs, communications signals, and power pins are re-routed onto a SODIMM edge connection to match the pin-out of the CM3.
Features Include: * Raspberry Pi CM3-compatible SODIMM edge connection * Power indicator LED
| Included Components | ||
| Raspberry Pi CM4 to CM3 | Uses Raspberry Pi CM4 Connector as its COM/processor. Functional modules include: Raspberry Pi CM Builder |
|
|---|---|---|
| Family | Raspberry Pi |
|---|---|
| Board-To-Board Connector | 2 x 100-pin Hirose DF40 Connectors |
| Raspberry Pi Compatible |
| Key Components | ||
| Mating Connectors | ||
| Stacking Board Connector, DF40 Series, Receptacle, 0.4 mm, 100, Surface Mount, Gold Plated Contacts | 100-pin Hirose DF40 connectors for compute devices such as the Intel® Joule™ module |
|
|---|---|---|
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.
Software Version: